Perfect for Tiny Homes, the Charnwood Aire 3 is the smallest wood heater in the Charnwood range.
This tiny little heater has an average heat out put 35m2 and offers all the benefits of clean glass, clean burning, fully vermiculite firebrick lined.
The best thing about the Charnwood Aire 3 is you can flue out the top or rear, making it perfect for tiny homes
Made in England, Charnwood heaters are beautifully hand made for the home that demands attention.
The tiny home movement is one of the largest growing industries in Australia.
Such tiny homes don’t require much heating, so its not he need, more the want when it comes to putting a wood heater in a small tiny home
The English made, Charnwood wood Aire 3 wood heater is tiny, purpose built for small rooms
The charnwood aire 3 wood heater is packed with all the features you need
Its small heat out put is perfect for heating a tiny home of 35m2
To ensure you get the romance of fire, the heaters quad burning technology is all about burning off the smoke, although the focus here is more for environmental and reducing carbon emissions, what this dos is gives you the most romantic and hypnotic flames
Another important aspect is the air, all fire needs this – and in an tiny home where the house is air-tight, there is not enough air for a wood heater.
The Charnwood Aire 3 has out-side-air : tall the air your fire needs is fed from out side via the inlet pipe, meaning the heater does not use any air form inside, all this air comes from out side
When it comes to size, the Aire 3 is all about being small.
The Charnwood Aire 3 can be installed as close as 75mm away from a timber or plaster wall – no heat shields or fireproofing the walls are necessary.
Safety is paramount for any wood heater, and having a cast iron door that locks securely with a lock style, the cool to touch door handle is so easy to use, and when you shut the door, the lock sound you get means you know the door is securely closed
Lighting the fire is so easy with the single air control, even when you go to clean out your fire, Charnwood have made this easy to with a removable ash pan
The flue used on these heaters is recommended to use the Insulated Room Seal Flue Kit ( RSF ) – not only is this flue cool to touch ( perfect for a small room ) but being a twist lock flue system you can easily remove the flue extension above your roof, allowing you to now relocate your tiny home without stressing over the additional height
|Rear clearance to combustible||75mm|
|Side clearance to combustible||325mm|
|Corner clearance to combustible||200mm|
|Rear clearance to non combustible||25mm|
|Side clearance to non combustible||25mm|
|Corner clearance to non combustible||25mm|
|min flue height||4mtrs|
10 year on firebox 1 year on consumable parts