products

yunca monte ECO (ULE approved ) wood heater

heats 200+m2

$3,290.00

The NEXT GENERATION Yunca Monte is now available

Whats new : its the cleanest burning YUNCA Ever @ 0.4Grms, its one of the cleanest wood heaters on the market

But thats not the most impressive point – the NEW MONTE ECO will save you over $ 500.00 in wood

The massively improved efficiency ( old model 70% ) the MONTE ECO is 82% max Efficiency.

If you are looking for a solid built wood heater, a wood heater with a proper cook top (  that you can cook on the top of  )

The Next generation YUNCA ECO is now here….

 

Compare Products

Yunca Wood Heater Blog

April 2020

Greg Parker-Hill

Interesting about the difference between New Zealand customer requirements and Australian customer requirements.

In Australia, the question regularly asked, will the heater be burning in the morning.

In New Zealand, the question regularly asked, will the heater still be hot in the morning

The Yunca wood heater’s are made with 10 x 40mm thermal mass furnace bricks that really hold the heat.

Unlike traditional fire bricks, thermal bricks are what are used in kilns and pizza ovens to ensure consistent heat for hours.

The difference thermal mass bricks offer is storage of the heat, and slow release over many hours to keep the heating in your home hours after the heater has gone out

The Yunca Monte wood heater will heat up to 200m2, and on a full load of wood will but 8 to 10 hours : but will continue to heat your home for at for up to 8 additional hours.

With the 10 firebricks on both sides and rear wall of your Yunca Monte, there bricks entirely cover all the firebox walls to give full environment for your fire.

Environment for your fire is critical for all wood heaters, to get the best form your fire, the actual fire need to be looked after.

On a good ash base, with furnace bricks on all sides, the fire can burn at a higher temperature to increase the efficiency.

This not only means you have a hotter fire,and left with ash ( heaters that leave massive lumps of un-burnt coals are a true sign of  a incomplete burn, or your fire is not burning at the right temperate )  but the best thing is you will get less smoke .

Baffle plate

Inside the heater, the baffle plate is made from 304grade stainless.

This baffle plate acts also as your secondary burn :

All wood heaters use “secondary air” technology. What this is : by introducing extremely hot air into the smoke your fire produces, you can re ignite the smoke ( which is un- burnt fuel )

This re-ignition does a number of things

– it gives you more heat : the additional flames you get from this re-ignition is heat you would not have have got.

– it reduces the smoke : reducing emissions for greenhouse gasses is the worlds number one long term issue, and wood heaters do produce smoke that does enter the atmosphere : by re burning the smoke, turning it into flames, you are significantly reducing the emissions

In the 1970’s and 1980’s when the wood heater boom took off, there was no real focus here, and for every 1kG of wood you burnt in your heater made in the 1970’s and 1980’s you produced up to 50gms of emissions in to the atmosphere

In the 1990’s and 2000’s, the introduction of secondary burn made a massive difference, heaters started to produce less smoke : down form 50gms per 1kG of wood – to 5gmrs per 1gk of wood you burnt

The Yunca Monte wood heaters only produced 0.92Grms of emissions per 1Kg of Wood you burn

How they do this is significantly increasing the temperature of the secondly air. Where traditional wood heaters have a round 25mm stainless ( or sometimes steel ) tube with holes under the baffle

This 25mm round tube has air passing through it, and being directly over your fire, it gets hot – the heat heats the air and when it comes out of the holes, this hot air ignites the smoke – creating a secondary burn

The difference is in the Yunca Monte wood heaters, rather than a small 25mm tube : the entire top baffle is the secondary air.

The baffle is 900% larger than a single 25mm air tube : thus this significant surface area increases the temperature of the air passing though this from a traditional 250+oC to over 800+oC

This significant air temperature entering the un burnt smoke ignites the smoke to create an extraordinary increased secondary burn.

 

 

 

wood-heater

Introducing the NEW 2024 Model Yunca Monte ECO

The Yunca Monte ECO is ULE approved
ULE ( or ULTRA LOW EMISSIONS) wood heaters are the cleanest category of wood heaters.
Highly sort after in New Zealand - Now made here in Australia for Ozzie hard Woods

24 or 36 month interest free available

Choose between 24 or 36 months interest free
Take home for as little as $21.39 per week (over 36 months interest free*) *Approved applicants only. Fees and T&Cs apply. To find out more, and get pre-approval click here.

Whats New with Yunca

The Yunca Monte's are now assembled in house @ Pivot Stove.
We have been working with Yunca to improve emissions and Efficiency : and we are now proud to present to you 2 x models to choose from

ULE Monte now available

ULE stands for
- Ultra
- Low
- Emissions
The New Monte ECO LE offers extremely low smoke, PERFECT for built up areas

## NEW ## THE MONTE ECO ULE

## NEW - Now Available ##
The High efficient MONTE ECO is tested at an impressive Max 82% (73% average) efficiency, and extremely clean burning at only 0.4 grms emissions
- Cleaner glass - Vermiculite Lined - And still with the large cook top

3 designs to choose from

choose the look of your yunca monte
- on legs
- on pedestal
- or on wood storage box (euro)

The #NEW# Monte Eco ULE Bricks

The #NEW# Yunca Eco ULE

Uses high density Vermiculite bricks.
These reflect the heat back into the fire to give you a hotter, cleaner fire, and more efficient fire - burning less wood

Save $1,000.00 each year

The Monte ECO is so much more efficient - it will save you over 2 TON a year in wood.
@ $ 500.00 a ton....
Thats a saving of up to $ 1,000.00 each year in firewood

How to stop draughts in your home

No matter which heater you choose, all wood heaters require air and that can cause draught's in your home.
To stop cold air entering your home - here are 2 simple things to do

optional wet back

the yunca monte is tested to have a wet back inside this heater. the yunca wet back is big enough to heat up to a 300+ltrs of hot water


Pricing





Options


Flue Kit




Fan


Flashing




Hearth




Total Price $0.00 (inc GST)
Please note that this pricing is indicative only and does not represent a quotation, nor does it include installation or delivery unless explicitly specified.

Specification

dimensions
height 784mm
width 663mm
depth 551mm
Clearances
Style Options Pedestal - Wood Store (euro) - Legs
Color Options Black
Rear clearance to combustible 200mm
Side clearance to combustible 450mm
Corner clearance to combustible 245mm
Burn time 10>12 hours+h
Info
flue size 150mm
min flue height 4mtrs
hot water Optional
heating capacity 200m2
Average efficiency 73%
Max efficiency 82%
Emissions 0.4grms
wood length 350mm
stove weight 170kg
Made in Geelong
Fan Optional

Warranty

10 year warranty on firebox 12 months on all other parts