pyroclassic mini – heats 100+m2
The Pyro mini is the perfect high efficient small heater, perfect for heating 100+m2
The Pyro difference is the unique ceramic cylindrical firebox that heats the wood to a higher temperature to burn out all the volatilizes to give you a cleaner, more efficient burn and at only 0.3grms emissions, the Pyro mini is one of the cleanest burning wood heaters on the market.
The ceramic firebox also gives you thermal mass – meaning your Pyro mini stays hotter, longer
For a free download of
Pivot’s Wood Heater Install Handbook
The fire chamber of a Pyroclassic fire gives it a unique edge over other wood fires.
Our ceramic cast cylinder retains heat like a kiln so you can enjoy a consistent warmth and the convenience of reloading less.
Industry standard fire bricks are incapable of storing the same level of excess heat, making it almost impossible to achieve extended burn times.
All Pyroclassic fires are low emission burners, with an emissions rate of only 0.3g/kg – less than half that of most other clean air wood fires.
Due to the impressive heat storage capabilities of the fire chamber, Pyroclassic fires consume considerably less firewood.
At a fuel consumption rate of only 0.9kg per hour for the Pyro Mini and 1.1kg per hour for the Pyro IV, a Pyroclassic fire is the smart choice for the environment and your wallet!
If you are interested in reading more on what Pyroclassic Fires is doing to minimize our impact on the environment, click HERE to learn about our involvement with the carbo NZero programme.
Water Heating Capabilities
Both the Pyroclassic Mini and Pyroclassic IV can be fitted with a wetback, providing a sustainable and more affordable long term solution for water heating.
- Pyroclassic Mini: 1.5kW wetback booster
- Pyroclassic IV: High output 3.7kW wetback
The wetback sits in the fire’s upper chamber, clear of the combustion zones so it receives the full heat of the gases once they have gone through the secondary combustion phase.
Good news, if you can’t make up your mind just yet, a wetback can be fitted after initial installation as there is no difference structurally between a dry and wet model, other than the wetback unit. Always talk to your plumber before you purchase a wetback
The 10mm thick steel top plate provides an excellent surface for cooking.
Boil the kettle, slow cook a casserole and even bake bread.
Increase your cooking potential on a Pyroclassic IV with our stylish and durable cooktop oven, which includes a handy trivet and embroidered oven mitt
Unique Air Control
Other than the Turboslide which is used for initial start-up and refueling, all Pyroclassic fires have fully automatic air controls. This means the fire controls the rate oxygen is supplied to the wood fuel, allowing it to maintain the right burn temperatures for a complete secondary combustion (gasification). This process ensures the glass stays clean right throughout the burn cycle. If you were manually able to dampen the fire down, like with most other wood fires, this is when the real harm is done to the environment as tars and poisonous unburnt gasses are released into the air
|Rear clearance to combustible||350mm|
|Side clearance to combustible||480mm|
|Corner clearance to combustible||370mm|
|Rear clearance to non combustible||105mm|
|Side clearance to non combustible||145mm|
|Corner clearance to non combustible||115mm|
|min flue height||4mtrs|
10 year warranty on firebox / 1 year warranty on all other parts