Pyro mini Blog

april

greg parker-hill

The fire chamber of a Pyro Fire gives it a unique edge over other wood fires.

Our ceramic cast cylinder retains heat like a kiln so you can enjoy a consistent warmth and the convenience of reloading less.

Industry standard fire bricks are incapable of storing the same level of excess heat, making it almost impossible to achieve extended burn times.

All Pyro Fires are low emission burners, with an emissions rate of only 0.3g/kg – less than half that of most other clean air wood fires.

Due to the impressive heat storage capabilities of the fire chamber, Pyro Fires consume considerably less firewood.

At a fuel consumption rate of only 0.9kg per hour for the Pyro Mini and 1.1kg per hour for the Pyro Classic, a Pyro Fire is the smart choice for the environment and your wallet!

If you are interested in reading more on what Pyro Fires is doing to minimize our impact on the environment, click HERE to learn about our involvement with the carboNZero programme.

Water Heating Capabilities

Both the Pyro Mini and Pyro Classic can be fitted with a wetback, providing a sustainable and more affordable long term solution for water heating.

• Pyro Mini: 1.5kW wetback booster
• Pyro Classic: High output 3.7kW wetback

The wetback sits in the fire’s upper chamber, clear of the combustion zones so it receives the full heat of the gases once they have gone through the secondary combustion phase.

Good news, if you can’t make up your mind just yet, a wetback can be fitted after initial installation as there is no difference structurally between a dry and wet model, other than the wetback unit. Always talk to your plumber before you purchase a wetback

Cooking

The 10mm thick steel top plate provides an excellent surface for cooking.

Boil the kettle, slow cook a casserole and even bake bread.

Increase your cooking potential on a Pyro Classic with our stylish and durable cooktop oven, which includes a handy trivet and embroidered oven mitt

Unique Air Control

Other than the Turboslide which is used for initial start-up and refueling, all Pyro Fires have fully automatic air controls. This means the fire controls the rate oxygen is supplied to the wood fuel, allowing it to maintain the right burn temperatures for a complete secondary combustion (gasification). This process ensures the glass stays clean right throughout the burn cycle. If you were manually able to dampen the fire down, like with most other wood fires, this is when the real harm is done to the environment as tars and poisonous unburnt gasses are released into the air