products

pyro fires classic – heats 180+m2

The Pyro Classic is designed for serious performance.

The ceramic cylindrical firebox is so unique, but what it does is burn wood hotter and more efficient ensuring its one of the cleanest burning wood heaters ever made at 0.3grms emissions – it’s mega clean

Made in NZ this heater heats like nothing else, the ceramic firebox ensures consistent heat 24/7 and with a 15+ hour burn time, it will heat all winter long

Unique in every way, you can choose the colour, and the base of your heater to suit your own styling

Pyro Fires have excitingly teamed up with OneTreePlanted to plant over twenty Australian Native trees for every Pyro, removing ten tonnes of CO2 from the environment per fire.

 

For a free download of
Pivot’s Wood Heater Install Handbook

CLICK HERE

Pyro Classic

april

greg parker-hill

The fire chamber of a Pyro Fires Classic gives it a unique edge over other wood fires.

Our ceramic cast cylinder retains heat like a kiln so you can enjoy a consistent warmth and the convenience of reloading less.

Industry standard fire bricks are incapable of storing the same level of excess heat, making it almost impossible to achieve extended burn times.

All Pyro Fires Classic are low emission burners, with an emissions rate of only 0.3g/kg – less than half that of most other clean air wood fires.

Due to the impressive heat storage capabilities of the fire chamber, Pyro Classic consume considerably less firewood.

At a fuel consumption rate of only 0.9kg per hour for the Pyro Fires Mini and 1.1kg per hour for the Pyro Classic, a Pyro Fires is the smart choice for the environment and your wallet!

If you are interested in reading more on what Pyro Fires is doing to minimize our impact on the environment, click HERE to learn about our involvement with the carboNZero programme.

Water Heating Capabilities

Both the Pyro Fires Mini and Pyro Classic can be fitted with a wetback, providing a sustainable and more affordable long term solution for water heating.

  • Pyro Mini: 1.5kW wetback booster
  • Pyro Classic: High output 3.7kW wetback

The wetback sits in the fire’s upper chamber, clear of the combustion zones so it receives the full heat of the gases once they have gone through the secondary combustion phase.

Good news, if you can’t make up your mind just yet, a wetback can be fitted after initial installation as there is no difference structurally between a dry and wet model, other than the wetback unit. Always talk to your plumber before you purchase a wetback

Cooking

The 10mm thick steel top plate provides an excellent surface for cooking.

Boil the kettle, slow cook a casserole and even bake bread.

Increase your cooking potential on a Pyro Classic with our stylish and durable cooktop oven, which includes a handy trivet and embroidered oven mitt

Unique Air Control

Other than the Turboslide which is used for initial start-up and refueling, all Pyro Fires have fully automatic air controls. This means the fire controls the rate oxygen is supplied to the wood fuel, allowing it to maintain the right burn temperatures for a complete secondary combustion (gasification). This process ensures the glass stays clean right throughout the burn cycle. If you were manually able to dampen the fire down, like with most other wood fires, this is when the real harm is done to the environment as tars and poisonous unburnt gasses are released into the air

pyro fires classic wood heater

the pyro fires classic is tested with an impressive 74% efficiency, or 5.5 star rating. This is 35% more efficient than other heaters in this range (meaning you will burn 3mtrs of wood less per year). as for emissions, the pyro classic is only 0.3grms, or 6 star rating (that's an impressive 88% cleaner burning than most wood heaters in this class)

unique ceramic firebox

The firebox is the pyro classic. a round ceramic cylinder heats the fire to over 600°C giving your fire the perfect environment to burn clean and produce a consistent heat

optional hot water

an optional wet back gives you up to 3kW of low pressure hot water. the installation of the wet back actually improves the performance of your pyro classic heater from 74% to an impressive 83.3% efficiency

pyro classic cooking

the 10mm top on your pyro is perfect for cooking, just add the optional removable oven for turning your cook top into a true cooking experience

pyro classic colour

pyro classic outer panels are powder coated to match your home, and with over 200 colours to choose from, there is a pyro colour perfect for you
Click here Interpon Colour Options

pyro classic review

the pyro classic wood fire is mega efficient and one of the cleanest burning heaters on the market, but leave it burning 24/7 for best results. the thermal mass of the firebox delivers a constant heat that will keep your home warm all winter long


Pricing








Options






Flue Kit



Flashing



Hearth




New home



Total Price $0.00 (inc GST)
Please note that this pricing is indicative only and does not represent a quotation, nor does it include installation or delivery unless explicitly specified.

Specification

dimensions
height 625mm
width 455mm
depth 645mm
Clearances
Rear clearance to combustible 350mm
Side clearance to combustible 480mm
Corner clearance to combustible 370mm
Rear clearance to non combustible 105mm
Side clearance to non combustible 145mm
Corner clearance to non combustible 115mm
Info
flue size 150mm
min flue height 4mtrs
hot water Optional
heating capacity 180m2
efficiency 74%
Emissions .3grms
wood length 450mm
stove weight 140kg

Want to know more - check out this products Blogs

Pyro Classic Blog